How to Add a Sengled Smart Light Bulb to a Wink Hub

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will walk you through how to install a new Sengled smart light and get it added into your existing Wink hub using the Wink app on your mobile device.

Before You Begin:

Setup Your Wink Hub
Before beginning, make sure your Wink hub is setup and working properly first.

• How to Set Up Your Wink Hub 2 Smart Home Hub

2. Install the New Bulb

1. Turn off the power to the lamp or light fixture where you want the smart light.
   

1. Remove your old bulb.
2. Carefully screw in your new Sengled bulb.
   

1. Turn your light on.
   

3. Add Sengled Lighting to the Wink App

Grab the mobile device you have the Wink app installed on in order to get your Sengled lights added.

1. Open Wink, and select Menu on the top left.
   

1. Select Products at the top, then select Add to Wink.
   

1. Select Lighting.
   

1. Select Lights.
   

1. Scroll down, and select the type of Sengled bulb you have.
   

1. You may be asked to allow Wink access to your location, select Allow.
   

1. Follow the instructions in the app to complete adding your Sengled light to your Wink hub.