How to add and reset Enerwave products on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

How to add and reset Enerwave products on Hubitat Elevation hub

2. Resolution

Factory Reset

1. To reset the ZWN-BDC-PLUS, simply press the exclusion button on the sensor 3 times and hold for 3 seconds on the 3rd press.

Join the Z-Wave Network

1. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
2. Press the inclusion/exclusion button on the sensor 3 times.

Exclusion from the Z-Wave Network

1. From the device's details page, select Remove Device, then Remove
2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
3. Press the inclusion/exclusion button on the sensor 3 times.

Device

Product Number

Device Type

Protocol

Ceiling Mounted PIR Motion Sensor

ZWN-BPC-Plus

Motion Sensor

Z-Wave Plus