How to add and reset GLEDOPTO products on Hubitat Elevation hub
Authored by: Support.com Tech Pro Team
1. Introduction
How to add and reset GLEDOPTO products on Hubitat Elevation hub
2. Resolution
Factory Reset
- Power ON the device and within 2 seconds, remove power.
- Repeat the OFF and ON 4 times in a row.
- The device will reset to factory default on the 5th time the power is applied.
- Reset is confirmed by the lights flashing 4 times.
Join the Zigbee Network
- Remove power from the GLEDOPTO Mini RGB+CCT controller.
- From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
- Power ON the device and within 2 seconds, remove power.
- Repeat the OFF and ON 4 times in a row.
- The device will reset to factory default on the 5th time the power is applied.
- Reset is confirmed by the lights flashing 4 times.
Leaving the Zigbee Network
- From the device's details page, select Remove Device, then Remove.
- Power ON the device and within 2 seconds, remove power.
- Repeat the OFF and ON 4 times in a row.
- The device will reset to factory default on the 5th time the power is applied.
- Reset is confirmed by the lights flashing 4 times.
Device
Product Number
Device Type
Protocol
Mini RGB+CCT Controller
GL-MC-001
Bulb
Zigbee