How to add and reset HomePro products on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

How to add and reset HomePro products on Hubitat Elevation hub

2. Resolution

Device

Product Number

Device Type

Protocol

Exterior Appliance Module

ZRP110

Outlet

Z-Wave

Factory Reset

1. Factory reset is achieved by performing a general exclusion.
2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
3. Tap the button on the front of the module once.

Join the Z-Wave Network

1. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
2. Tap the button on the front of the module once.

Exclusion from the Z-Wave Network

1. From the device's details page, select Remove Device, then Remove
2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
3. Tap the button on the front of the module once.