How to add and reset KEEN Home products on Hubitat Elevation hub
Authored by: Support.com Tech Pro Team
1. Introduction
How to add and reset KEEN Home products on Hubitat Elevation hub
2. Resolution
Factory Reset
- Press the black button on the back inside of the Smart Vent battery compartment 5 times.
- You will know that the Smart Vent has been properly reset when the LED starts double flashing Green
Join the Zigbee Network
- From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
- Removed the battery cartridge and reinsert it to bring the vent online.
- Press the black button on the back inside of the Smart Vent battery compartment 5 times.
- This should force the vent into join-mode once again.
Leaving the Zigbee Network
- From the device's details page, select Remove Device, then Remove
- Press the black button on the back inside of the Smart Vent battery compartment 5 times.
- You will know that the Smart Vent has been properly reset when the LED starts double flashing Green
Device
Product Number
Device Type
Protocol
Smart Vent
Vent
Zigbee