How to add and reset Salus products on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

 

How to add and reset Salus products on Hubitat Elevation hub

 

2. Resolution

Factory Reset

  1. Press the button on the outlet for 10 seconds.
  2. The light surrounding the button will flash Red 5 times, and will then go out.

Join the Zigbee Network

  1. From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
  2. Press the button on the outlet for 10 seconds.
  3. The light surrounding the button will flash Red 5 times, and will then go out.
  4. If the device is not discovered by Hubitat Elevationâ„¢, then unplug the outlet for 10 seconds and plug it in again. It should now be discovered by the hub.

Leaving the Zigbee Network

  1. From the device's details page, select Remove Device, then Remove.
  2. Press the button on the outlet for 10 seconds.
  3. The light surrounding the button will flash Red 5 times, and will then go out.

Device

Product Number

Device Type

Protocol

Smart Plug

SP-600

Outlet

Zigbee