How to add and reset Sengled products on Hubitat Elevation hub
Authored by: Support.com Tech Pro Team
1. Introduction
How to add and reset Sengled products on Hubitat Elevation hub
2. Resolution
Factory Reset
- Power cycle on and off 15 times, VERY quickly, ending on the ON position.
- An on and off-cycle counts as 1
- If successful, the bulb will flash 5 times, and will then be in pairing mode.
Join the Zigbee Network
- From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
- Power cycle on and off 15 times, VERY quickly, ending on the ON position.
- An on and off-cycle counts as 1
- If successful, the bulb will flash 5 times, and will then be in pairing mode.
Leaving the Zigbee Network
- From the device's details page, select Remove Device, then Remove.
- Power cycle on and off 15 times, VERY quickly, ending on the ON position.
- An on and off-cycle counts as 1
- If successful, the bulb will flash 5 times, and will then be in pairing mode.
Device
Product Number
Device Type
Protocol
Element Bulbs
NIL
Bulb
Zigbee
Device
Product Number
Device Type
Protocol
Smart Window and Door Sensor
E1D-G73WNA
Contact Sensor
Zigbee
Factory Reset
- To reset the sensor, use the provided tool, or something equally thin like a paper clip.
- Press and hold the reset button inside the unit for 8 seconds.
- If successful, the Red light on the face of the sensor will flash 2 times.
- After the sensor is reset, you will have one minute to add it to your hub.
Join the Zigbee Network
- From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
- To reset the sensor, use the provided tool, or something equally thin like a paper clip.
- Press and hold the reset button inside the unit for 8 seconds.
- If successful, the Red light on the face of the sensor will flash 2 times.
- After the sensor is reset, you will have one minute to add it to your hub.
Leaving the Zigbee Network
- From the device's details page, select Remove Device, then Remove.
- To reset the sensor, use the provided tool, or something equally thin like a paper clip.
- Press and hold the reset button inside the unit for 8 seconds.
- If successful, the Red light on the face of the sensor will flash 2 times.
- After the sensor is reset, you will have one minute to add it to your hub.
Device
Product Number
Device Type
Protocol
Multi-Color Light Strip
E1G-G8E
Bulb
Zigbee
Factory Reset.
- Press and hold the reset button inside the unit for 10 seconds.
- If successful, the light strip will flash 5 times.
Join the Zigbee Network
- From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
- Press and hold the reset button inside the unit for 10 seconds.
- If successful, the light strip will flash 5 times.
Leaving the Zigbee Network
- From the device's details page, select Remove Device, then Remove.
- Press and hold the reset button inside the unit for 10 seconds.
- If successful, the light strip will flash 5 times.
Device
Product Number
Device Type
Protocol
Smart Plug
E1C-NB6
Outlet
Zigbee
Factory Reset.
- Press and hold the power button for 15 seconds.
- If successful Blue indicator light will stay on briefly, and then slowly pulse on and off.
Join the Zigbee Network
- From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
- Press and hold the power button for 15 seconds.
- If successful Blue indicator light will stay on briefly, and then slowly pulse on and off.
Leaving the Zigbee Network
- From the device's details page, select Remove Device, then Remove.
- Press and hold the power button for 15 seconds.
- If successful Blue indicator light will stay on briefly, and then slowly pulse on and off.
.png)
