How to add and reset Third Reality products on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

 

How to add and reset Third Reality products on Hubitat Elevation hub

 

2. Resolution

Factory Reset

  1. Press the button on the front of the device for approximately 30 seconds.
  2. The LED will light steady for several seconds, then it will begin to flash rapidly
  3. The device has been reset and is ready for pairing.

Join the Zigbee Network

  1. From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.
  2. Start with the Light Strip powered ON.
  3. Press the button on the front of the device for approximately 30 seconds.
  4. The LED will light steady for several seconds, then it will begin to flash rapidly

Leaving the Zigbee Network

  1. From the device's details page, select Remove Device, then Remove.
  2. Press the button on the front of the device for approximately 30 seconds.
  3. The LED will light steady for several seconds, then it will begin to flash rapidly
  4. The device has been reset and is ready for pairing.

Brand

Device

Product Number

Device Type

Protocol

Third Reality

Reality Switch

NIL

Switch

Zigbee