How to add and reset TKB products on Hubitat Elevation hub
Authored by: Support.com Tech Pro Team
1. Introduction
How to add and reset TKB products on Hubitat Elevation hub
2. Resolution
Factory Reset
- Plugin the dimmer module.
- Press the ON/OFF button 3 times within 1.5 seconds to enter inclusion mode.
- Within 3 seconds, press and hold the ON/OFF button for 5 seconds.
Join the Z-Wave Network
- Plugin the dimmer module.
- From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
- Press the ON/OFF button 3 times within 1.5 seconds to enter inclusion mode.
Exclusion from the Z-Wave Network
- Plugin the dimmer module.
- From the device's details page, select Remove Device, then Remove.
- From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
- Press the ON/OFF button 3 times within 1.5 seconds to enter exclusion mode.
Device
Product Number
Device Type
Protocol
TKB Dimmer Socket
TZ67
Dimmer
Z-Wave Plus