How to add and reset Utilitech products on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

 

How to add and reset Utilitech products on Hubitat Elevation hub

 

2. Resolution

Factory Reset

  1. Remove the battery cover.
  2. Press the pairing button in between the batteries 8 times, 1 second apart.

Join the Z-Wave Network

  1. Remove the battery cover.
  2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
  3. Press the pairing button once.

Exclusion from the Z-Wave Network

  1. Remove the battery cover
  2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
  3. Press the pairing button once.

Device

Product Number

Device Type

Protocol

Indoor Siren

TSE07

Siren

Z-Wave