How to add and reset Wireless products on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

How to add and reset Wireless products on Hubitat Elevation hub

2. Resolution

Factory Reset

1. Briefly press the program button on the back of the device.
2. The status LED will light up and then immediately turn off.

Join the Z-Wave Network

1. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
2. Briefly press the program button on the back of the device.
3. The status LED will light up for 5 seconds and then turn off upon successful inclusion into the Z-Wave network.

Exclusion from the Z-Wave Network

1. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
2. Briefly press the program button on the back of the device.
3. The status LED will light up and immediately turn off upon successful exclusion from the Z-Wave network.

Device

Product Number

Device Type

Protocol

Smoke Detector

ZWN-SD

Valve

Z-Wave