How to add and reset Yeelight products on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

 

How to add and reset Yeelight products on Hubitat Elevation hub

 

2. Resolution

Factory Reset

  1. Switch the bulb on and off 5 times in a row (2 seconds ON and 2 seconds OFF).
  2. The bulb will start pulsing slowly up and down.
  3. After 5 seconds, it will restart automatically, which means the bulb has been reset to factory defaults.

Join the LAN

  1. From the Hubitat Web Interface home page, select Apps.
  2. Choose Yeelight Integration from the list of Hubitat Elevationâ„¢ Built-In Apps
  3. Using the Yeelight mobile app, enable LAN Control for each Yeelight prior to starting discovery. The LAN Control option can be enabled by selecting the lower right icon in the mobile app menu for each bulb.
  4. Open the Yeelight setup and start bulb discovery.

Leaving the LAN

  1. From the device's details page, select Remove Device, then Remove.
  2. Switch the bulb on and off 5 times in a row (2 seconds ON and 2 seconds OFF).
  3. The bulb will start pulsing slowly up and down.
  4. After 5 seconds, it will restart automatically, which means the bulb has been reset.

Device

Product Number

Device Type

Protocol

Yeelight Mono / CT bulbs

NIL

Bulb

LAN

Device

Product Number

Device Type

Protocol

Yeelight Color bulbs

NIL

Bulb

LAN

Factory Reset

  1. Switch the bulb on and off 5 times in a row (2 seconds ON and 2 seconds OFF).
  2. The bulb will start flashing
  3. After 5 seconds, it will turn white, which means the bulb has been reset to factory defaults.

Join the LAN

  1. From the Hubitat Web Interface home page, select Apps.
  2. Choose Yeelight Integration from the list of Hubitat Elevationâ„¢ Built-In Apps
  3. Using the Yeelight mobile app, enable LAN Control for each Yeelight prior to starting discovery. The LAN Control option can be enabled by selecting the lower right icon in the mobile app menu for each bulb.
  4. Open the Yeelight setup and start bulb discovery.

Leaving the LAN

  1. From the device's details page, select Remove Device, then Remove.
  2. Switch the bulb on and off 5 times in a row (2 seconds ON and 2 seconds OFF).
  3. The bulb will start flashing
  4. After 5 seconds, it will turn white, which means the bulb has been reset to factory defaults.