How to add and reset ZLINK products on Hubitat Elevation hub
Authored by: Support.com Tech Pro Team
1. Introduction
How to add and reset ZLINK products on Hubitat Elevation hub
2. Resolution
Factory Reset
- Turn on the connected lighting with the rocker.
- Quickly tap on the top of the rocker 3 times.
- Now quickly tap on the bottom of the rocker 3 times.
- When reset is successful, the light will turn off and on again.
Join the Z-Wave Network
- From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
- Press the rocker switch once to include the device in the Z-Wave network.
- If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.
Exclusion from the Z-Wave Network
- From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
- Press the rocker switch once to exclude the device from the Z-Wave network.
- If exclusion fails, perform a factory reset.
Brand
Device
Product Number
Device Type
Protocol
ZLINK
Dimmer
ZL-WD-100
Dimmer
Z-Wave Plus
Brand
Device
Product Number
Device Type
Protocol
ZLINK
Switch
ZL-WS-100
Switch
Z-Wave Plus
Factory Reset
- Turn on the connected lighting with the rocker.
- Quickly tap on the top of the rocker 3 times.
- Now quickly tap on the bottom of the rocker 3 times.
- When reset is successful, the light will turn off and on again.
Join the Z-Wave Network
- From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
- Press the rocker switch once to include the device in the Z-Wave network.
- If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.
Exclusion from the Z-Wave Network
- From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
- Press the rocker switch once to exclude the device from the Z-Wave network.
- If exclusion fails, perform a factory reset.
.png)
