How to Calibrate a DJI Drone's Compass

Authored by: Support.com Tech Pro Team

1. Introduction

Before piloting your DJI drone outside for the first time or if it started flying erratically or not flying normally after a while, you may need to calibrate its compass.

Calibrating your drone's compass on a regular basis can cause more harm than good to its operation. Only perform the calibration if:

• You're flying at a location farther than six miles away from the last flight location.
• The drone hasn't been flown for more than one month.
• The DJI GO 4 app persistently shows compass interference warnings after changing location.

Tools You'll Need:

• No extra tools are needed.

-->

Supplies You'll Need:

• No extra supplies are needed.

-->

Before You Begin:

You must have the app installed on your phone or tablet.

• How to Install the DJI GO 4 App

The drone should be connected to your phone or tablet.

• Connect Your DJI Spark Drone to Your Mobile Device Over Wi-Fi
• Connect Your DJI Mavic Air Drone to Your Mobile Device Over Wi-Fi
• Connect Your DJI Mavic Pro Drone to Your Mobile Device Over Wi-Fi

2. Calibrate Your DJI Drone's Compass

1. Launch the DJI GO 4 app.
   

1. Go to the menu in the top right corner.
   

1. Then go to the drone tab on the top left.
   

1. Go to Advanced Settings at the bottom.
   

1. Then go to Sensor State.
   

1. Select Compass in the top middle.
   

1. And tap Calibrate Compass.
   

1. Rotate the drone as indicated in the app. The app will wait for you to complete each rotation correctly.
   

1. 
   
2. Only calibrate your drone's compass in a wide open location and make sure no magnets or metal objects are within 5 feet of your drone.
3. Your drone is now calibrated and safe to be flown.