How to Connect Minox DTC 460 Trail Camera to a Computer

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will show you on how to connect Minox DTC 460 Trail Camera to a Computer.

2. Resolution

Transferring your files via USB cable

Always ensure that the camera is switched off before connecting it to a computer. Connect your camera to the computer using the USB cable (included in delivery) via the USB port. Switch the camera to TEST mode (main switch in the middle). The camera will now be recognized as a removable storage device. Your photos and videos can now be copied to a folder on your PC.

Transferring your files via SD card

Always ensure that the camera is switched off before the SD card is removed from the camera, otherwise the files on your memory card could be damaged. Remove the memory card from the slot and insert it into the card reader connected to your computer. Some computers also have an internal slot for SD cards - in this case, insert the SD card directly into the slot on your computer. Your photos and videos can now be copied to a folder on your PC.

Connection to the TV

To connect your camera to a TV, set the MINOX DTC 460 to SETUP mode and then connect the USB cable to the camera. Connect the other end of the cable to the TV. Then select the appropriate video input source on the TV set for the USB input you are using.