How to do Installation of Skypoint Link Micro LTE Trail Camera on a MAC

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will show you on how to do Installation of Skypoint Link Micro LTE Trail Camera on a MAC.

2. Resolution

Installation Steps:

1. Make sure to use a Micro SD card class 10/U1 up to 32GB.

2. Format the Micro SD card on your computer (Format:MS-DOS(FAT)).

3. Download the update file from our website.

4. Double-click on the .zip file.

5. Open the camera name folder.

6. Copy all the files from the .zip file onto the Micro SD card.

7. Verify the copy has been successful on your Micro SD card.

8. On the Micro SD card, right-click on MacOS_PrepareSDCard.command and select open with terminal to run the file.

9. Eject the Micro SD card from the computer.

10. Make sure the camera is turned OFF.

11. Insert the Micro SD card into the camera.

12. Power ON the camera.

13. The camera will run the firmware update by itself for around 90 seconds. («Status» light flashes orange rapidly).

14. Then, it will flash green for a short period.

15. Then, it will flash orange slowly.

16. Then, the camera will restart by itself and it will go through the connection process. («Status» light flashes green).

17. The camera firmware will be up to date.