How to Manually Connect Subwoofer or Surround Speakers of Samsung HW-Q900T Soundbar

Authored by: Support.com Tech Pro Team

1. Manually Connect

INSTRUCTIONS ON HOW TO MANUALLY CONNECT THE SUBWOOFER OR SURROUND SPEAKER

Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer or Surround Speakers are connected properly.
• Make sure that the Soundbar is turned off.

1. Turn off the Soundbar main.
   
   
2. Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds.
   The red indicator at the rear of each speaker turns off and the blue indicator blinks.
   

1. 
   
   
2. Press the Up button on the remote control for 5 seconds.
   • The ID SET message appears on the display of the Soundbar for a moment, and then it disappears.
   • The Soundbar will automatically power on when ID SET is complete.
   

1. 
   
   
2. Check if the LINK LED is solid blue (connection complete).
   

1. 
   The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer, surround speakers.