How to Set Up an eero Mesh WiFi Network

Authored by: Support.com Tech Pro Team

1. Introduction

If you have weak spots in your WiFi signal, making gaming or streaming anywhere in your house impossible, you can get an Eero Mesh Wi-Fi Network. You can purchase just the Pro router or a pack that comes with multiple Eero Pro's or Eero Beacons. The beacons are used to extend the Wi-Fi "mesh" throughout your home, while the Pro's add Ethernet ports as well as extend your Wi-Fi.

Setup is simple. Just install the app and plug in your new router.

Tools You'll Need:

• A mobile device such as an Android phone or an iPad.
• Your Modem.
• An Ethernet cable.

Supplies You'll Need:

• Zip ties
• Any other consumable supplies
• Comment out supplies section if no supplies are necessary

-->

Before You Begin:

You must have the Eero app installed.

• How to Install the Eero Home WiFi System App

Eero Bundles

Eero systems can come bundled with different setups. You can purchase just the Eero Pro Router, or purchase a bundle that comes with Beacons. You can also purchase a bundle of multiple Pro Routers.

While the Pro Routers have Ethernet ports, the Beacons only handle Wi-Fi. A Pro Router is required for Beacons to work.

2. Connect Your Eero up to Your Modem

Unplug Your Modem

1. Unplug your modem.
   

Connect Your Eero to Power

Please ensure that you are using the power adapter that came with your Eero.

1. Locate the power cable and connect it to a power source like an outlet or surge protector.
2. Plug the other end of the power cable to the Eero's power input in the back.
   

1. Your Eero should power on.

Connect Your Eero to the Modem

Your Eero must be connected to a modem in order to provide the local network with an Internet connection.

1. Acquire an Ethernet cable.
   

1. Take one end of the cable and plug it into the Internet (or WAN) port on the rear of your Eero.
   

1. Take one end of the cable and plug it into an available Ethernet (or LAN) port on the rear of your modem. These ports are typically yellow.
   

1. Wait for the Eero's LED to blink blue.

3. Add Your Eero to the Eero Home App

1. With the blue light blinking on your Eero, go back to your Eero app. Tap Next.
   

1. The app will search for your Eero. Tap Next.
   

1. Pick the room your Eero is located in.
   

1. Your Eero has been read and connected. Tap Next.
   

1. Next we'll create your network. Type in the name of your network and your password. Tap Next.
   

1. Success! Your network is setup! Tap Next.
   

1. Select No, I'm all set because you're done!
   

Do You Have Additional Eeros?

• How to Add an Eero to an Existing Mesh WiFi Network CON-5876