How to use IFTTT Applets with Blink

Authored by: Support.com Tech Pro Team

1. Introduction

How to use IFTTT Applets with Blink

 

2. Resolution

 

Once you have selected this, you will have the option to connect this applet to your system

 

At this point, if you have not yet been asked, IFTTT may prompt you to allow or not allow push notifications. Tap on Allow to make sure that notifications are sent to your device.

Next you will be taken to a screen where you can set the location for this applet to occur and the system you wish to arm

When the location is being set, you can either manually enter the address or use the current location. You can also pinch in and out to fine tune the radius

Once done, tap Save. You will then see the applet is connected

Now lets take a look at disarming when you arrive.

Locate and select the “Disarm your Blink System when you get home” applet

Once selected go ahead and connect it

As before, you will be prompted to toggle notifications on or off as well as selecting the location for this applet and the system you wish to disarm

You will need to set the location you wish enter to disarm the system. Remember you can fine tune this by pinching in or out

Once all the important information has been set, tap Save.

Now under “My Services” in the IFTTT app you should see these turned on